Quick Release Pin - 1/4" x 1"Specifications: Diameter: 1/4" Grip Length: 1" Use with: 14-205 and 14-206

Quick Release Pin - 3/16" x 9/16"Specifications: Diameter: 3/16" Grip Length: 9/16" Use with: 15-212

Quick Release Pin - 3/8" x 13/16"Specifications: Diameter: 3/8" Grip Length: 13/16" Use with: O2 Series

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be obtained. 1/4″ pin.Specifications: Pin-to-pin adjustment: 1-3/4″ to 3-5/8″ Safe working load: 400 lbs.

Rigging Tape - Black - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines,...

Rigging Tape - White - 1" x 15'C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines,...

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes...

Rigging Toggle - 3/8" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pin. All sizes...

Safe Lock Gate Hook T-316Features: Stainless, safe, inexpensive design Practical Sailor called a "well-engineered hunk of metal"  Adjusts in place with knurled nut Stamped metal construction 3/4 in. long from end of body to inside bearing point of hook Specifications: 3/16" wire 1/4"-28 L.H....

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 3/16" Wire 1/4" Pin 1" adj.

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj.

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook.

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Small Boat KitKit Contents: (6) Clevis Pin Dia. 3/16" GL 17/32" (6) Clevis Pin Dia. 1/4" GL 1/2" (4) Clevis Pin Dia. 5/16" GL 11/16" (10) Cotter pin 3/32" x 3/4 Type 316 Stainless Steel (10) Circular Pin 3/16" & 1/4" with Starter (6)...

Snap Gate Hook - Body Only - 1/4" - 28 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:1/4"-28 LH

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 LH

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 RH