improve the quality of wind measurement and reliability of your installation. 3 major benefits: Improve steering through noise reduction Up to 80% of electronics problems stem from the mast Up to 3 wind sensors can be utilized and connected at the same time, the automatic...

Wind measurement with no disturbance, 1.10m above the mast. nke’s exclusive sensor! Carbowind is a highly accurate instrument for measuring wind data. The long vertical carbon arm places the sensor’s head more than a meter above the mast head, clear  of the upwash effects...

This fluxgate compass connects to the nke bus and it feeds the system with the magnetic compass heading value. The mounting location must be free from any magnetic influence (VHF, high power cables, radar, etc.). The 10° step compensation ensures an accurate heading. Compass...

7 inch graphic color screen, the Multidisplay gives access to all the digital and graphical data of your installation. Optical bonding offers a vision angle beyond compare. Its intuitive interface allows you to:   Customize screen types as well as to select the proper...

5.7’’ LED colour screen.Wide 160° reading angleLow consumption thanks to a luminosity sensor.NMEA input and monitor page. Two bezel colours available : white [ref. 90-60-359] or carbon like [ref. 90-60-399] Dimensions (H x L x D) : 118 x 192 x 23 mm Consumption: 90 mA without lighting,150...

The Compass 9X nke is a precision sensor comparable to an inertial power plant, performing the fusion of data from accelerometers, gyrometers and magnetometers in real time. It delivers a real orientation in the 3D space: heading, lodging and pitching. Motion and orientation are...

The Box nke allows you to multiplex the bus data (wind, speed...) and the data from the NMEA input (AIS, GPS...) to applications. It broadcasts data such as heading and distance to the WPT on the bus, to display on multifunction displays. Combined with...

A new driving mode that improves handling: the real wind mode melts. A very responsive bottom speed GPS type: 65 Channels Output: Bus TOPLINE and NKEA 183 Power supply: 12v DC for TOPLINE Bus and 6-33v for other use Consumption: 50 mA at 12v...

The Processor and HR Driver are recognized as the performance driver. This new Processor V3.7 is the result of a new development that allows an immediate grip with the expected performance. The main settings are now available directly on the Multigraphic. This high-end pilot...

Simplicity and Accuracy. The wind sensor measures the wind angle through 360°,it is easy to install on the mast headand an offset value can be applied to adjust the alignment to the boats centreline. This offset is usually  required as the mechanical alignment achieved...

Natural complements of Multidisplay there are 2 versions of PAD: The PAD Pilot: with its “PAGE”, “OK” and arrow keys you can change the display, enter the menus, perform sensor calibrations and driver settings. The following 6 keys are dedicated to the autopilot. The MOB...

High resolution, responsiveness and repeatability. The wind sensor “HR” is highly accurate for both angle and speed measurements: less than 1° for wind angle and less than 1% for wind speed linearity. It measures wind angle through360° and its sensitivity allows wind speed measurement...